4. Walking operation
1. Turn the working mode switch on the remote control to the middle position, the machine enters
the walking mode, release the switch, and the switch remains in the middle position.
2. Operate the two walking handles K6 and K5 on the remote control, the machine can go forward,
backward, turn and rotate.
3. To travel at high speed, press the high-speed travel button, and the speed will change to
high-speed.
4. When walking at high speed, adjust to low speed when turning, observe the surrounding
conditions while walking, and park the machine at the required position.
Note: Changing the handle range and throttle size can change the walking speed accordingly. After
pressing the follow-up release button, turn the potentiometer to change the walking speed accordingly.
To Next Page
Loading...