4. Walking operation
1. Adjust the throttle (7) of the console so that the throttle lever is in the middle position and the
engine runs at a medium speed.
2. Turn the manual/remote control switch (16) down to manual mode, release the switch, and the
switch will stop at the manual mode position.
3. Turn the working mode switch to the middle position, the machine enters the walking mode, release
the switch, and the switch stops at the middle position.
4. Operate the two walking handles (5 and 6), the machine can move forward, backward, turn and
rotate.
5. To travel at high speed, turn the high and low speed switch (15) up to high-speed travel mode.
6. When walking at high speed, adjust to low speed when turning, observe the surrounding conditions
while walking, and park the machine at the required position.
To Next Page
Loading...