SPXFLOW C Series - Page 59

Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 59
C-114 Pump Parts, continued
Notes:
* Recommended Spare Parts - also available in kits (see page 74)
1. For casings with Bevel threaded, Female I-Line, NPT or Flanged connections, please contact factory.
2. These items are needed to change the motor adapter.
4. Contact factory if casing drain, passivation, or optional finish is required.
5. Used with standard "D" seal only.
6. Optional motor shrouds available for these frame sizes only.
7. Shown with standard type “D” Seal. For other optional seals, see page 72 and page 73.
8. Backplate pins (11F) are included with the backplate if purchased as a spare part.
9. Applies only to the Sealed Impeller Design.
10. Does not apply to the Sealed Impeller Design; applies only to the Pin Impeller Design.
11. Contact your local distributor for other impeller sizes and finishes.
12. Type “F” seal is a type “D” seal with a water cascade attachment.
ITEM DESCRIPTION QTY. PART NO. NOTES
Adapter, D71 Frame, 304SS 60845+ 2, 6
Adapter, D80/D90L Frame, 304SS 60846+ 2
71
A
Adapter Pin 2 30-434
Adapter Mounting Bolt, D71 Frame: M8x30 with nut N/A
Adapter Mounting Bolt, D80/D90L Frame: M10x40 with nut N/A
75
Clamp Assembly 1 60080+
75
K
Wing Nut 1 60083+
* 80 Inboard Rotar
y
Seal, Carbon
1 60085+ 7
80
A
Cup 1 60088+
Seal O-Rin
g
, Buna N
N70210
* Seal O-Rin
g
, FKM
V70210
Seal O-Rin
g
, EPDM
E70210
80C
Spring 1 60091+
80
K
Setscrew 2 60570+
80L
Drive Collar 1 60094R1
Casin
g
Gasket, Buna N
60099+
* Casin
g
Gasket, FKM
60100+
Casin
g
Gasket, EPDM
60626+
Guard Assembly, D71/D80 Frame 60782+
Guard Assembly, D90L Frame 60783+
137
Water Cascade Inlet Assembly, optional 1 60112+ 12
PL5050-CH10b
90
1
131
12
71
1
71B
42
80B
1