SPXFLOW C Series - Page 63

Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 63
C-216 Pump Parts, continued
Notes:
* Recommended Spare Parts - also available in kits (see page 74)
1. For casings with Bevel threaded, Female I-Line, NPT or Flanged connections, please contact factory.
2. These items are needed to change the motor adapter.
4. Contact factory if casing drain, passivation, or optional finish is required.
5. Used with standard "D" seal only.
6. Optional motor shrouds available for these frame sizes only.
7. Shown with standard type “D” Seal. For other optional seals, see page 72 and page 73.
8. Backplate pins (11F) are included with the backplate if purchased as a spare part.
9. Applies only to the Sealed Impeller Design.
10. Does not apply to the Sealed Impeller Design; applies only to the Pin Impeller Design.
11. Contact your local distributor for other impeller sizes and finishes.
12. Type “F” seal is a type “D” seal with a water cascade attachment.
ITEM DESCRIPTION QTY. PART NO. NOTES
Adapter, D80/D90 Frame, 304SS 60847+ 2
Adapter, D100/D112M Frame, 304SS 60848+ 2
Adapter, D132S Frame, 304SS 60849+ 2
71
A
Adapter Pin 2 30-434
Adapter Mounting Bolt, D80/D90 Frame: M10x40 with nut N/A
Adapter Mounting Bolt, D100/D112M Frame: M12x40 with nut N/A
Adapter Mounting Bolt, D132S Frame: M12x60 with nut N/A
75
Clamp Assembly 1 60081+
75
K
Wing Nut 1 60083+
* 80 Inboard Rotar
y
Seal, Carbon
1 60086+ 7
80
A
Seal Cup 1 60089+
Seal O-Rin
g
, Buna N
N70216
* Seal O-Rin
g
, FKM
V70216
Seal O-Rin
g
, EPDM
E70216
80C
Spring 1 60092+
80
K
Setscrew 2 30-178
80L
Drive Collar 1 60095R1
Casin
g
Gasket, Buna N
60101+
* Casin
g
Gasket, FKM
60102+
Casin
g
Gasket, EPDM
60627+
Guard Assembly, D80/D90 Frame 60785+
Guard Assembly, D100/D112M Frame 60786+
Guard Assembly, D132S Frame 60787+
137
Water Cascade Inlet Assembly, optional 1 60112+ 12
PL5050-CH11b
90
1
131
12
71
1
71B
42
80B
1