Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 67
C-218 Pump Parts, continued
Notes:
* Recommended Spare Parts - also available in kits (see page 74)
1. For casings with Bevel threaded, Female I-Line, NPT or Flanged connections, please contact factory.
2. These items are needed to change the motor adapter.
4. Contact factory if casing drain, passivation, or optional finish is required.
5. Used with standard "D" seal only.
6. Optional motor shrouds available for these frame sizes only.
7. Shown with standard type “D” Seal. For other optional seals, see page 72 and page 73.
8. Backplate pins (11F) are included with the backplate if purchased as a spare part.
9. Applies only to the Sealed Impeller Design.
10. Does not apply to the Sealed Impeller Design; applies only to the Pin Impeller Design.
11. Contact your local distributor for other impeller sizes and finishes.
12. Type “F” seal is a type “D” seal with a water cascade attachment.
ITEM DESCRIPTION QTY. PART NO. NOTES
Adapter, D90L Frame, 304SS 60850+ 2
Adapter, D100L/D112M Frame, 304SS 60851+ 2
Adapter, D132S Frame, 304SS 60852+ 2
Adapter, D160M/L Frame, 304SS 60853+ 2, 6
71
Adapter Pin 2 30-434
Adapter Mounting Bolt, D90L Frame: M10x40 with nut N/A
Adapter Mounting Bolt, D100L/D112M Frame: M12x40 with nut N/A
Adapter Mounting Bolt, D132S Frame: M12x60 with nut N/A
Adapter Mounting Bolt, D160M/L Frame: M16x50 with nut N/A
75
Clamp Assembly 1 60082+
75
Wing Nut 1 60083+
* 80 Inboard Rotar
Seal Cup 1 60090+
Seal O-Rin
, Buna N
N70222
* Seal O-Rin
, EPDM
E70222
80C
Spring 1 60093+
80
Setscrew 2 30-178
80L
Drive Collar 1 60096R1
Casin
Gasket, Buna N
60103+
* Casin
Gasket, EPDM
60628+
Guard Assembly, D90L Frame 60789+ 2
Guard Assembly, D100L/D112M Frame 60790+ 2
Guard Assembly, D132S Frame 60791+ 2
Guard Assembly, D160M/L Frame 60793+ 2, 6
137
Water Cascade Inlet Assembly, optional 1 60112+ 12
PL5050-CH12b
2
80B
1
90
1
131
1
71
1
71B
4
To Next Page
Loading...
