EasyManua.ls Logo

SPXFLOW C Series - Page 69

SPXFLOW C Series
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 69
C-328 Pump Parts
Notes:
* Recommended Spare Parts - also available in kits (see page 74)
1. For casings with Bevel threaded, Female I-Line, NPT or Flanged connections, please contact factory.
2. These items are needed to change the motor adapter.
4. Contact factory if casing drain, passivation, or optional finish is required.
5. Used with standard "D" seal only.
6. Optional motor shrouds available for these frame sizes only.
7. Shown with standard type “D” Seal. For other optional seals, see page 72 and page 73.
8. Backplate pins (11F) are included with the backplate if purchased as a spare part.
9. Applies only to the Sealed Impeller Design.
10. Does not apply to the Sealed Impeller Design; applies only to the Pin Impeller Design.
11. Contact your local distributor for other impeller sizes and finishes.
12. Type “F” seal is a type “D” seal with a water cascade attachment.
ITEM DESCRIPTION QTY. PART NO. NOTES
3
Impeller Nut - Sealed Impeller Design 1 138534+ 9
Impeller Nut O-rin
g
- Sealed Impeller Desi
g
n, BUNA N
N70124
Impeller Nut O-rin
g
- Sealed Impeller Desi
g
n, FKM
V70124
Impeller Nut O-rin
g
- Sealed Impeller Desi
g
n, EPDM
E70124
Shaft Collar - Sealed Impeller Design, D100L/D112M Frame 135580+
Shaft Collar - Sealed Impeller Design, D132S Frame 135699+
Shaft Collar - Sealed Impeller Design, D160L/M Frame 135700+
Shaft Collar - Sealed Impeller Design, D180M Frame 135974+
Stub Shaft, D100L/D112M Frame 60529E
Stub Shaft, D132S Frame 60530E
Stub Shaft, D160L/M Frame 60531E
Stub Shaft, D180M Frame 361540602180E
Stub Shaft - Sealed Impeller Design, D100L/D112M Frame 138563+
Stub Shaft - Sealed Impeller Design, D132S Frame 138564+
Stub Shaft - Sealed Impeller Design, D160L/M Frame 138565+
Stub Shaft - Sealed Impeller Design, D180M Frame 138566+
Shaft Setscrew, D100L/D112M Frame 30-715
Shaft Setscrew, D132S, D160L/M, D180M Frame 30-716
7
Impeller Key - Sealed Impeller Design 1 138587+ 9
Stub Shaft O-rin
g
- Sealed Impeller Desi
g
n, BUNA N
N70124
Stub Shaft O-rin
g
- Sealed Impeller Desi
g
n, FKM
V70124
Stub Shaft O-rin
g
- Sealed Impeller Desi
g
n, EPDM
E70124
11
Backplate 1 60012+ 4, 5, 8
11F
Backplate Pin 2 60013+ 8
*24
Impeller Retainer 1 60041+
Deflector, D100L/D112M/D132S Frame 60046+
Deflector, D160L/M, D180M Frame 60049+
Adapter, D100L/D112M Frame, 304SS 60851+ 2
Adapter, D132S Frame, 304SS 60852+ 2
Adapter, D160L/M Frame, 304SS 60853+ 2, 6
Adapter, D180M Frame, 304SS 60853+ 2
PL5050-CH13
71
1
*8
19
40
1
6
1
10
9
6A
310
*4
19
5
19

Related product manuals