SPXFLOW C Series - Page 71

Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 71
C-328 Pump Parts, continued
Notes:
* Recommended Spare Parts - also available in kits (see page 74)
1. For casings with Bevel threaded, Female I-Line, NPT or Flanged connections, please contact factory.
2. These items are needed to change out the motor frame.
4. Contact factory if passivation or optional finish is required.
5. Used with standard "D" seal only.
6. Optional motor shrouds available for these frame sizes only.
7. Shown with standard type “D” Seal. For other optional seals, see page 72 and page 73.
8. Backplate pins (11F) are included with the backplate if purchased as a spare part.
9. Applies only to the Sealed Impeller Design.
10. Does not apply to the Sealed Impeller Design; applies only to the Pin Impeller Design.
11. Contact your local distributor for other impeller sizes and finishes.
12. Type “F” seal is a type “D” seal with a water cascade attachment.
ITEM DESCRIPTION QTY. PART NO. NOTES
71
A
Adapter Pin 2 30-434
Adapter Mounting Bolt, D100L/D112M Frame: M12x40 with nut N/A
Adapter Mounting Bolt, D132S Frame: M12x60 with nut N/A
Adapter Mounting Bolt, D160L/M Frame: M16x50 with nut N/A
Adapter Mounting Bolt, D180M Frame: M16x50 with nut N/A
75
Clamp Assembly 1 60082+
75
K
Wing Nut 1 60083+
*80
Inboard Rotary Seal, Carbon 1 60087+ 7
80
A
Seal Cup 1 60090+
Seal O-Rin
g
, Buna N
N70222
* Seal O-Rin
g
, FKM
V70222
Seal O-Rin
g
, EPDM
E70222
80C
Spring 1 60093+
80
K
Setscrew 2 30-178
80L
Drive Collar 1 60096R1
Casin
g
Gasket, Buna N
60103+
* Casin
g
Gasket, FKM
60104+
Casin
g
Gasket, EPDM
60628+
Guard Assembly, D100L/D112M Frame 60790+ 2
Guard Assembly, D132S Frame 60791+ 2
Guard Assembly, D160L/M Frame 60793+ 2, 6
Guard Assembly, D180M Frame 60793+ 2
137
Water Cascade Inlet Assembly, optional 1 60112+ 12
PL5050-CH13b
131
1
71B
4
80B
1
90
1