8
ENGLISH
Night: Choose the BOOST option for maximum brightness
at night, select OPTIMAL to reduce fuzziness at night, and
MIN BLUR to minimize the blurriness of moving objects. Once
you have made your selection, press OK. (Note: Regardless of
the mode, the ash remains invisible.)
OTHER OPTIONS
Name: Allows to give a name to your camera.
About: Indicates the software version.
Default: Resets all default settings.
Format: Allows the camera to format the SD card the next
time it is used. (Reformatting the SD card will delete all photos
and videos on the card. Only format the card if you are sure
you want to delete everything on it. Transfer all data to your
computer beforehand).
OPERATION
Once the setup is complete, turn the button from SETUP to ON.
You may also switch from SETUP to OFF and turn the device
ON later.
RED LIGHT ON THE FRONT OF THE CAMERA
When the switch is in the SETUP position, the red light will
ash to conrm a motion detection once you have adjusted
your settings.
To Next Page
Loading...
