EasyManua.ls Logo

Spypoint FORCE-PRO - SD Card Handling Procedures

Spypoint FORCE-PRO
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
ENGLISH
When you move the switch to the ON position, the red light at
the front of the camera will ash for 30 seconds to allow you to
move out of the camera's eld of view.
When the light turns o, the camera is ready for use.
INSTALLATION
Recommended height of installation:
The camera must be installed at the height of the centre line
of the animal’s body.
Ideal setup for high-quality images and videos:
The target animal should be 7.5 m from the camera to get
a better line of sight.
To produce brighter photos at night, there sould be items
reecting the camera's ash in the background.
Please note that the camera should never be directly pointed
at the sun to avoid back lighting and faulty detections.
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES.
Operation is subject to the following two
conditions:
1. This device must not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.

Other manuals for Spypoint FORCE-PRO

Related product manuals