Spypoint LM2 - Verification; Camera Status Notifications

15
LM2SPYPOINT
VERIFYING CAMERA STATUS
Dierent tools are available to help you check the status of your
LM2 and to inform you of any problems that may occur
during its operation. In this section, we will see 3 tools:
NOTIFICATIONS
The camera was designed to send notications to your SPYPOINT app.
This is to help you stay informed of the status of your camera.
You will receive a notication on your smartphone at the next transfer
when a photo is received or important notication is sent:
• You forget to insert a microSD card in your camera.
• The inserted microSD card is not compatible with your camera.
• The battery percentage is too low.
APPLICATION STATUS PAGE
Here are the dierent indicators of the LM2 status you have access to. They are
accessible on your app or on the SPYPOINT website. What appears in this page
is a reection of the camera at the last communication.
SIGNAL
Strength of the cellular signal
1 - 5 bars
BATTERY
Charge level
0 - 100%
(LIT-10/12 V)
MEMORY CARD
Used space
0 - 100%
LAST COMMUNICATION
The date and time of the last device transfer
Date and time
TEMPERATURE
°C or °F
MODEL
LM2
VERSION
Displays the software version
VX.XX.XX
LAST INSTALLATION
Last time your camera was turned ON
Date and time
SIM
Number on your SIM card
89……
ACTIVATION CODE
XXXX-XXX-XXXX
Verification