EasyManuals Logo

SRAM Ematic User Manual

SRAM Ematic
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Battery & HuB
BATTERY & HUB
No memory effect; the battery does not require full charge or full discharge between charging cycles.
Capacity will slowly decrease with use at the rate of ~20% per 500 full discharge-charge cycles.
Lithium-Ion Battery Voltage Distance*
Charge Time
(approximate)
BATTERY
9.7 Ah/350 Wh
36.2 V
50-95 km (31-59 miles) 4.25 hrs
7.7 Ah/280 Wh 40-80 km (25-50 miles) 3.5 hrs
5.8 Ah/210 Wh 30-60 km (19-37 miles) 2.5 hrs
*
Distance is dependent on conditions & terrain
LED INDICATORS AND SOUNDS
Pushing the button on the top of the battery will cause the fuel gage
LEDs to illuminate for several seconds, indicating battery charge level.
Pushing the power button will cause all the fuel gage LEDs to ash for a
fraction of a second, followed by three beeps from the battery, and three
beeps from the hub, indicating they are operating properly.
The battery will beep twice every ve minutes when the charge level is
below 5%. Charge the battery immediately in this case.
A continuous series of beeps from the hub indicates an error.
LONG-TERM STORAGE
Store in a cool, dry place when not in use.
Inspect the charge status every three months and recharge to 50% when necessary. The battery can
become permanently damaged if left completely discharged.
1-10%
11-20%
21-40%
41-60%
61-80%
81-100%
CHARGE LEVEL

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SRAM Ematic and is the answer not in the manual?

SRAM Ematic Specifications

General IconGeneral
BrandSRAM
ModelEmatic
CategoryBicycle Accessories
LanguageEnglish

Related product manuals