SRM PowerControl 7 - Speed Transmitter and Handlebar Clip Installation

- Page 9-
...

1. Install front wheel skewer
or fork mounted pod.
2. Install the provided magnet on
your spokes so it passes within
3-5mm of the speed
transmitter.
3. Speed sensor is ready to pair.

1. SRM provides handlebar clips
to mount PowerControls to
various handlebars.
2. Mount the handlebar clip to
the right of the stem so the
balls point forward and the
screw point upwards
(aluminium model downwards).
3. Secure the handlebar clip with
the bolt. Do not overtight.