- Page 23 -
To download your training files and setup the PowerControl using
your computer, use the supplied CD or download the SRM Software
at www.srm.de and install it at Windows 2000, XP, Vista and
Windows 7 computer. The SRM software installer will offer the
following choices:
1. Standard setup
Will install the SRM Software
with drivers for PC VI and 7.
2. Software only (for Updates)
Will install only the SRM
Software without drivers.
3. Software and all drivers
Will install the SRM Software
with drivers for PC IV, V and
PC VI, 7.
If needed, the software and drivers are also available separately on
the supplied CD or at www.srm.de.
To Next Page
Loading...
