8310-00
Light Switch
Rain Sensor Unit
(Integrated auto light sensor)
(3) Auto Light
The auto light sensor unit is installed to the back side of the ECM mirror located upper center of the
windshield, and detects the illuminance change. The STICS communicates with the auto light sensor
when the ignition is turned on, and turns on or off the tail lamp and headlamp automatically according to
the signals from the sensor when the light switch is set to AUTO position.
Auto light sensor
STICS controls the head lamp and tail lamp with LIN data with IGN ON and the light switch
Not available for EU market.
To Next Page
Loading...
Need help?
General
