7410-32
4) Easy Access Function
Seat Return Operation When Turning the Ignition Switch to ON Position
When turning the ignition switch to ON from OFF position with the easy access switch pressed, after 30
ms, STICS starts to send the return signal to SPWM unit. If SPWM receives the data properly, it
operates the return operation.
The prohibit conditions for the easy access seat return operation are as follows:
The parking brake is released or the shift lever is in any position other than "P".
Any of seat switch is operated during the return operation.
Ignition switch is cycled (ON and OFF) with short interval (approx. 1 ~ 1.5 seconds) for over 3
seconds.
-
-
-
To Next Page
Loading...
Need help?
General
