4892-01
3. ARP (Active Roll-Over Protection)
1) Overview
The ARP (Active Roll-over Protection) system is a safety assistant device that minimizes, by
controlling brakes and the engine, the physical tendency of the vehicle rollover during sharp lane
changes or U-turns. For the system, software is added to the existing ESP system and no
additional device or switch is needed. One must note that the ARP system, just as general
assistant devices including the ABS, is only a safety assistant device using the ESP system and its
function is useless when the situation overcomes the physical power. Following picture shows how
the ARP compensates the vehicle position by varying each wheel's braking power to overcome the
physical tendency of the vehicle rollover during sharp turns.
The vehicle driving condition is controlled by the internally programmed logic according to the
input signals from wheel speed sensor, steering angle sensor and lateral sensor.
To Next Page
Loading...
Need help?
General
