SSB-Electronic Zeus-1

To Next Page

To Previous Page

Software settings

Operation by hotkeys and MIDI devices

VFO A – choose VFO A;

VFO B – choose VFO A;

VFO A = B – equating frequency VFO A and B;

VFO A <> B – swaps the VFO A and B;

SPLIT, SPLIT Lock – on / off functions for SPLIT, SPLIT Lock;

RIT On/Off, XIT On/Off – on / off functions for RIT and XIT;

RIT/XIT Up/Down – adjustment of RIT and XIT values;

PRS On/Off – preselector setting;

Attenuator Up/Down – attenuator setting;

HF AGC Up/Down – RF AGC settings (Off, Max, Min);

Amplifier Control – on / off control of external power amplifier;

TX – switch to transmission mode;

TX PWR Up/Down – output power adjustment;

Mic DSP A, Mic DSP B – choice of microphone settings;

TUN – switch to carrier mode;

TUN PWR Up/Down – carrier power adjustment;

LPW On/Off – switch for low power mode;

CWT On/Off – switch for CW test;

CW Speed Up/Down – CW speed control;

CW Tone Up/Down – CW pitch adjustment;

CW Ratio Up/Down – adjustment of dash / dot ratio;

CW Tone Hardness – hardness of CW tone (Hard, Medium, Soft);

CW Break In Up/Down – adjustment of Break-In Delay;

Record Audio – start / stop recording an audio file;

Play Last Record – transmit recorded file;

Record IQ – start / stop recording an IQ file;

Time Machine Up/Down – shift adjustment Time Machine;

Time Machine Reset – reset Time Machine;

CW Template 1-12 – transmitting of CW template;

Setup CW Template 1-12 – editing of CW template.

SSB-Electronic Zeus-1 - Page 82