Washing Your Motorcycle
with a Mild Detergent
SERVICE MAINTENANCE,
LUBRICATION AND
ADJUSTMENTS (cont.)
1. Rinse your motorcycle thoroughly with cool
water to remove loose dirt. Do not wash it in
direct sunlight.
2. Fill a bucket with cool water. Mix in a mild,
neutral detergent, such as dish washing liquid or
a product made especially for washing motor
cycles or automobiles. We strongly recommend
you use a car- and motorcycle-specic product.
3. Wash your motorcycle with a sponge or a soft
towel. As you wash, check for heavy grime. If
necessary, use a mild cleaner/degreaser to
remove the grime.
4. After washing, rinse your motorcycle thoroughly
with plenty of clean water to remove any
residue.
5. Thoroughly dry your motorcycle with a chamois
(real or synthetic) or a soft towel.
6. Lubricate the drive chain to prevent rusting.
7. Start the engine and let it idle for several
minutes. The engine heat will help dry moist
areas.
8. As a precaution, ride at a low speed and apply
the brakes several times. This will help dry the
brakes and restore normal braking performance.
64
To Next Page
Loading...