SSR SR150 - Removal from Storage

Removal from Storage
5. Wash and dry your motorcycle.
6. Lubricate the drive chain.
7. Inate the tires to the recommended air
pressure.
8. Store your motorcycle in an unheated area, free
of dampness, away from sunlight, with a
minimum of temperature variation.
9. Cover your motorcycle with a porous material.
Avoid using plastic or similar non-breathable,
or coated materials that restrict air ow and
allow heat and moisture to accumulate.
1. Uncover and clean your motorcycle.
2. If your motorcycle has been stored for more
than four months, change the engine oil.
3. If your motorcycle has been stored for more
than two months, drain and replace the fuel.
4. Lubricate the drive chain.
5. Check tire ination and add air, if needed, to
return ination to specications.
6. Perform a pre-ride inspection, then test-ride your
motorcycle at low speeds.
67