SST SST-PFB-SLC - 3.1 Equipment and tools

To Next Page

To Previous Page

SST-PFB-SLC User’s Guide

3.1 Equipment and tools

Have the following tools and equipment ready:

• SLC programming equipment

• SST ProfiBus Configuration Tool, or Siemens COM PROFIBUS

software

• communication software

• null modem cable

• ProfiBus cable to connect the scanner to the ProfiBus network.

3.2 Package Contents

Unpack the module. Make sure that the contents include:

• ProfiBus scanner

• this manual

• serial null modem cable for uploading I/O configurations

• CD with files for DOS installation

• CD with files for Windows 95/NT installation

Note

Prior to performing the procedures outlined in this section,

ensure that the latest version of the software has been

downloaded to the module. The firmware is available on our

website:

www.sstech.on.ca