ST B-L4S5I-IOT01A - Connectors; ARDUINO Uno V3 Connectors

7 Connectors
Nine connectors are implemented on the B-L4S5I-IOT01A Discovery kit for the IoT node:
• CN1, CN2, CN3 and CN4 for ARDUINO
®
Uno V3 connector
• CN5: Tag connector
• CN7: ST-LINK USB connector
• CN8: ST-LINK debug connector
• CN9: USB_OTG_FS connector
• CN10: Pmod
™
connector.
In addition, one jumper JP5 is used for I
DD
measurements.
7.1
ARDUINO
®
Uno V3 connectors
CN1, CN2, CN3, and CN4 are female connectors (SMD component devices) compatible with ARDUINO
®
Uno V3.
Most shields designed for ARDUINO
®
can fit the B-L4S5I-IOT01A Discovery kit for the IoT node.
Example connector references (Refer to Figure 16):
• CN4: Header 6X1_Female_SMD
• CN3: Header 8X1_Female_SMD
• CN2: Header 8X1_Female_SMD
• CN1: Header 10X1_Female_SMD
Figure 16. ARDUINO
®
Uno V3 connectors
CN1
CN3
CN2
CN4
1
10
1
8
1
6
1
8
UM2708
Connectors
UM2708 - Rev 1
page 26/43