ST NUCLEO-F207ZG User Manual

December 2017 DocID028599 Rev 7 1/82
1
UM1974
User manual
STM32 Nucleo-144 boards
Introduction
The STM32 Nucleo-144 boards (NUCLEO-F207ZG, NUCLEO-F303ZE, NUCLEO-F412ZG,
NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-F439ZI, NUCLEO-F446ZE,
NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI and
NUCLEO-H743ZI) provide an affordable and flexible way for users to try out new concepts
and build prototypes, by choosing from the various combinations of performance and power
consumption features provided by the STM32 microcontroller. The ST Zio connector, which
extends the Arduino
™
Uno V3 connectivity, and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo-144 boards do not require any separate
probe as they integrate the ST-LINK/V2-1 debugger/programmer. The STM32 Nucleo-144
boards come with the comprehensive free software libraries and examples available with
the STM32Cube MCU Package, as well as a direct access to the Arm
®
Mbed Enabled
™
on-
line resources at http://mbed.org.
Figure 1. Nucleo-144 board (top view) Figure 2. Nucleo-144 board (bottom view)
www.st.com
All manuals and user guides at all-guides.com
all-guides.com

ST NUCLEO-F207ZG Specifications

General

Microcontroller	STM32F207ZG
Core	ARM Cortex-M3
Operating Frequency	120 MHz
Flash Memory	1 MB
SRAM	128 KB
ADC Channels	16
DAC Channels	2
On-board Debug	ST-LINK/V2-1
Operating Voltage	3.3 V
Communication Interfaces	USART, SPI, I2C, CAN, USB
Connectors	Arduino Uno R3, ST morpho
Debug Interface	SWD
Timers	12 (ranging from 16-bit to 32-bit)