ST NUCLEO-L433RC-P - Hardware Layout and Configuration

Hardware layout and configuration UM2206
10/55 UM2206 Rev 3
9 Hardware layout and configuration
The STM32 Nucleo-64-P board is designed around the STM32 microcontrollers in a
64-pins LQFP package.
Figure 3 illustrates the connection between the STM32 and the peripherals (ST-LINK/V2-1,
push-buttons, LEDs, Arduino Uno V3 connector and ST morpho connectors).
Figure 4 and Figure 5 show the location of these features on the STM32 Nucleo-64-P
board.
The mechanical dimensions of the board are showed in Figure 6.
Figure 3. Hardware block diagram
06Y9
67/,1.B93DUW
670PLFURFRQWUROOHU
26&B
6:'
9''B0&8
99
.+]
&U\VWDO
9&3
8$57
*3,2V
*3,2
/('
*3,2
(PEHGGHG
67/,1.9
6:'
6:'
9&3
8$57
86%0LFUR
%FRQQHFWRU
%
8VHU
%
567
$UGXLQR
67PRUSKR
*3,2
$UGXLQR
67PRUSKR
9
3:56(/
9
/('
9''B9
([W3:5
-XPSHU
-3
Q567
9&3
-367/
Q567
&20