UM1570 Rev 7 37/41
UM1570 STM32F3DISCOVERY information
40
7.3 Board revision history
Table 9. Board revision history
Board reference
Board variant and
revision
Board change
description
Board limitations
MB1035
(main board)
Default-B01 Initial revision
When the board is used as
a USB application, like a
mouse or another similar
device, it needs to be
powered up through the
ST-LINK USB connector
first.
Default-C01
– PCB label MB1035-C01,
SB13 and SB15 ON
– STM32F103C8T6
replaced by
STM32F103CBT6, ST-
LINK/V2-B
Default-D01
PCB label MB1035-D01,
only silkscreen
modification
F303C-E02
– C7 and C9 changed
from 20 pF to 33 pF
– U3 changed from
LSM303DLHC to
LSM303AGR
– U5 changed from
L3GD20 to I3G4250D
To Next Page
Need help?
General
