Revision history UM1570
40/41 UM1570 Rev 7
Revision history
Table 10. Document revision history
Date Revision Changes
10-Sep-2012 1 Initial release.
20-Sep-2012 2 Added Figure 7 on page 11 and updated Figure 12 on page 35
07-Feb-2013 3
Updated Section 6.2: Embedded ST-LINK/V2 (or V2-B): removed
WLCSP package, sigma-delta ADC, CEC, updated timers and
SPI/I²Ss.
21-Jul-2016 4
Updated to introduce the information that boards come with ST-
LINK/V2 or ST-LINK/V2-B.
Updated Section 1: Features, Section 3: Ordering information,
Section 6.2.4: Using ST-LINK/V2 (or V2-B) to program/debug the
STM32F303VCT6 on board, Section 6.2.5: Using ST-LINK/V2 (or
V2-B) to program/debug an external STM32 application, Table 5:
Solder bridges, Table 6: STM32F303VCT6 MCU pin description
versus board function.
Added Section 2: Product marking, Section 6.2.1: Drivers,
Section 6.2.2: ST-LINK/V2 (or V2-B) firmware upgrade,
Section 6.2.3: VCP configuration.
13-Apr-2018 5
Corrected the VCP pin connection of the MCU from incorrect
PA9&PA10 to PC4&PC5 in Section 6.2.3: VCP configuration and
Table 7: STM32F303VCT6 MCU pin description versus board
function.
27-Aug-2020 6
Reshuffle the document to align with the latest standards:
– Introduction to Quick start reordering
– Electrical schematics removed
–New Table 2: Codification explanation and Section 7:
STM32F3DISCOVERY information
Updated:
– Features, Figure 2, Section 6.7, Section 6.8, and Table 7
header adding
LSM303AGR and I3G4250D sensors
15-Sep-2023 7
Updated STM32F3DISCOVERY information chapter with
refreshed Product marking section and new Product history and
Board revision history tables