AN3216 Revision history
Doc ID 17496 Rev 5 29/30
8 Revision history
Table 7. Document revision history
Date Revision Changes
28-Jun-2010 1 Initial release
29-Jul-2010 2
Updated the following sections: Section 2.1: Introduction,
Section 2.1.1: Independent A/D converter supply and reference
voltage, Section 2.1.2: Independent LCD supply, Section 2.3.1:
Power-on reset (POR)/power-down reset (PDR), brownout reset
(BOR), and Section 2.3.4: System reset.
Added Section 2.3.3: Brownout reset (BOR).
Replaced Figure 3, Figure 4, Figure 5, and Figure 6.
In Section 3.3.2, replaced RCC_ICR register by RCC_CIR register.
Replaced PF0_OSC_IN and PF1_OSC_OUT by PH0_OSC_IN and
PH1_OSC_OUT in Figure 15 and Ta ble 6 .
Updated value of C4 and C9 decoupling capacitors in Figure 15.
01-Oct-2010 3
Modified Section 2.3.4: System reset on page 13
Updated capacitors in Ta ble 4 and Ta ble 4
07-Apr-2011 4
Changed title of document from “STM32L1xxx hardware
development: getting started” to “Getting started with STM32L1xxx
hardware development”.
Modified Section 3.1: MSI clock, Section 2.2: Power supply
schemes, and Figure 2.
29-Jun-2011 5
Updated Section 2.1.1: Independent A/D converter supply and
reference voltage and Section 2.2: Power supply schemes.
To Next Page
Loading...
Need help?
General
