Do you have a question about the ST STM8A-DISCOVERY and is the answer not in the manual?
Core | STM8 |
---|---|
Flash Memory | 8 KB |
RAM | 1 KB |
EEPROM | 1 KB |
Clock Speed | 16 MHz |
GPIO Pins | Up to 38 |
On-Board Debugger | ST-LINK/V2 |
Push Buttons | 2 |
Communication Interfaces | UART, SPI, I2C |
Operating Temperature | -40°C to +85°C |
Development Environment | ST Visual Develop (STVD) |
ADC Channels | 10 |
Step-by-step instructions for initial setup and operation of the STM8A-DISCOVERY.
Lists the necessary hardware and software prerequisites for using the STM8A-DISCOVERY.
Identifies compatible software development tools for the STM8A-DISCOVERY kit.
Details the shared functionalities and components across both STM8AF and STM8AL boards.
Outlines the specific hardware features and components exclusive to the STM8AF board.
Outlines the specific hardware features and components exclusive to the STM8AL board.
Covers shared hardware elements like ST-LINK/V2, power supply, and general ICs.
Details the specific resources, microcontrollers, LEDs, buttons, and connectors on the STM8AF board.
Details the specific resources, microcontrollers, LEDs, buttons, LCD, and connectors on the STM8AL board.
Presents the physical dimensions and component layout for the STM8AF board.
Presents the physical dimensions and component layout for the STM8AL board.