EasyManua.ls Logo

ST STM8A-DISCOVERY - Features; STM8 AF and STM8 AL common board features; STM8 AF dedicated board features; STM8 AL dedicated board features

ST STM8A-DISCOVERY
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features UM1574
8/48 Doc ID 023645 Rev 1
3 Features
The STM8A-DISCOVERY offers different features combined with STM8AF and STM8AL
boards:
STM8AF and STM8AL common board features:
On-board ST-LINK/V2 included for debugging and programming
Board power supply: through 5 V USB bus
Internal dual ST662A step-up converter building the 12 Vdc when powered by USB
port
External application power supply V
BAT
(up to 14 Vdc)
16 MHz HSE XTAL crystal oscillator
L99PM62GXP power management IC with LIN and high speed CAN with SPI control
interface and high-side drivers
Two push buttons (USER1 and USER2)
Extension header for L99PM62GXP including relays, high-side outputs and wake-up
capabilities
STM8AF dedicated board features:
STM8AF5288T microcontroller featuring 64 Kbytes Flash, 2 Kbytes data EEPROM,
LIN, CAN in an 48-pin package
Seven LEDs:
LD1 (red/green) for USB communication
LD2 (red) for 5 V power ON
Five user LEDs LD3 (red) and LD4 to LD7 (green)
RV1 potentiometer connected to the ADC peripheral
Extension headers for MCU connectivity (full Port B, free ports pins, RESET)
STM8AL dedicated board features:
STM8AL3L68T microcontroller featuring 32 Kbytes Flash, 1 Kbytes data EEPROM,
LCD in an 48-pin package
Four LEDs:
LD1 (red/green) for USB communication
LD2 (red) for 3.3 V power ON
2 user LEDs LD3 (red) and LD4 (green)
4-digit alphanumeric LCD display including 4 bars display
Extension header for MCU connectivity (free ports pins, RESET)

Table of Contents

Related product manuals