ST STM8S User Manual

UM0671 Getting started with the touch sensing evaluation kit
Doc ID 15330 Rev 4 5/23
2.3 User interface
The joystick is the main user interface used to display keys values and state or to modify the
main touch sensing library parameters: de-bounce filter, detection time-out, low power
mode, DES setting, etc.
Note: The 5 touch sensing keys are also for navigating through the touch sensing menu.
Figure 3. Navigation scheme
1. After power on, to quickly display the key and slider states (display option 1), move the joystick once to the right (→) and
twice towards the bottom (↓).
Decrement
Resolution
Increment
Resolution
**Menu**
Help push
down
(1)
**Menu**
Key info
**Menu**
Detect
TIMEOUT
**Menu**
De-bounce
Filter
**Menu**
Low Power
Mode
**Menu**
DES Setting
**Menu**
About
Exit sub-menu
Enter sub-menu
Scroll right
Scroll left
Menu entry point
Detect
TIMEOUT
00 sec
De-bounce
Filter
3
Low Power
Mode
128 mSec
DES Setting
Disable
STM8S Touch
Eval Vx.x.x
1
2
3
4
**Menu**
Sel Key
summary
**Menu**
Select Key X
**Menu**
Select slider
K1 K2 K3 K4 K5
Slider Bar: = = = = = = = =
STATE Key X
Idle or Detected
KeyX Sig=0x0184
KeyX Ref=0x015E
Noise rejection
Counter KeyX
0000
Slider STATE
Idle or Detected
S Sig=0x92
S Pos=0x09
< Resolution <
x bits
Display
sub-menus
1 2 3
4
5 6
Counter
RESET
Parameter
setting
sub-menus
S Resolution
x bits
7
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ST STM8S Specifications

General

Brand	ST
Model	STM8S
Category	Microcontrollers
Language	English