April 2018 AN2752 Rev 6 1/40
1
AN2752
Application note
Getting started with STM8S and STM8AF microcontrollers
Introduction
This application note complements the information contained in STM8S and STM8AF
datasheets by describing the minimum hardware and software environment required to build
an application around these 8-bit microcontrollers.
This document also contains detailed reference design schematics with descriptions of the
main components, and some hardware recommendations.
Some of the information given in Section 9: Software toolchain and Section 10: Setting up
the development environment has a wider scope, to know if it applies to STM8 MCUs
different from those of the STM8S and STM8AF Series contact your local representative.
www.st.com
To Next Page
Need help?
General
