To Next Page

To Previous Page

Development tools AN2752

22/40 AN2752 Rev 6

Emulation system: STice

• Emulator box

• Cables for USB, power supply, trigger, analyzer input

Connection flex

• 60-pin or 120-pin cable for connection to the application board

Connection adapter

• Links the connection flex to the footprint of the STM8S or STM8AF microcontroller

Adapter socket

• Package-specific socket for connection adapter and STM8S or STM8AF

microcontroller

8.2.2 STice in emulation configuration

In emulation configuration, the STice is connected to the PC via a USB interface and to the

application board in place of the target microcontroller being used.

• Connection flex: Flexible cable (60-pin or 120-pin depending on the target

microcontroller) that relays signals from the STice to the application board

• Connection adapter: Links the connection flex to the footprint of the target

microcontroller on the users application board.

• Adapter socket: Socket that solders to the application board in place of the

microcontroller and receives the connection adapter.

The above accessories are not included with the STice system. To determine exactly what is

required for any supported microcontroller, refer to the online product selector on

ST STM8S Getting Started

Other manuals for ST STM8S