AN2752 Rev 6 39/40
AN2752 Revision history
39
12 Revision history
Table 3. Document revision history
Date Revision Changes
03-Jun-2008 1 Initial release
01-Sep-2008 2
STM8S207/208 replaced by STM8S20xxx
Figure 10: Reference design on page 19 and Figure 12: LQFP 80-pin
pinout on page 21 modified to be in line with the pin description of the
STM8S20xxx datasheet
Figure 7: Reset management on page 14 modified
01-Apr-2009 3 Modified Section 2.2: Main operating voltages on page 8
05-Aug-2011 4
Table 1: General operating conditions: replaced
Figure 10: Reference design on page 19: updated the value of the C4
capacitor.
31-Aug-2011 5
Added STM8A throughout the document as this revision covers STM8A
devices.
Replaced “Root part number 2” with STM8S and STM8A.
Updated Section 2.2: Main operating voltages: removed Table 1:
General operating conditions and added a reference to the STM8S and
STM8A datasheets.
Removed Section 5.2: Hardware reset implantation.
Table 1: Component list: updated ‘Reference’ value for ‘ID’ 6.
Removed Section 7.3: Pinouts.
Updated references in Section 11: Documentation and on-line support
04-Apr-2018 6
Document scope limited to STM8S and STM8AF Series, hence
updated title and Introduction.
Updated Recommendations and Figure 3: Typical layout of VDD/VSS
and VCAP/VSS pairs.
Minor text edits across the whole document.
To Next Page
Loading...
Need help?
General
