Stabila LD 520 - Adjusting measuring reference;tripod; Memory

LD 520
14
ENFunctions
Adjusting measuring reference/tripod
1
2
3
Distance is measured from the rear of the
device (standard setting).
Distance is measured from the front of the
device (lock symbol = permanently).
Distance is measured from the tripod
thread permanently.
4
Confirm setting.
i
If device is switched off, reference
goes back to standard setting
(rear of the device).
Memory
1
2
12.208 m
6.554 m
23.889 m
8.449 m
9m
8
.4
4
9
m
3
Switch between
measurements.
Take over value for
further actions.
Delete memory.
4
Use Up/Down
navigation keys to
show more detailed
results of the speci-
fic measurement.
i
Short cut