Stairmaster StepMill SM916 - Configuration Codes; Machine Type and Settings Reset

Owner’s Manual
39
3. To exit MAINTENANCE LOG , press the [CLEAR] key.
Conguration Codes
1. Press [Level: UP], [8], [ENTER]. The console will display CONFIGURATION.
2. Press [Level: UP] or [Level: DOWN] to scan through the choices. Select the
option you want by pressing [ENTER].
Change Machine
Changes the machine type from StairClimber, StepMill
®
machine, Bike rev B,
Bike rev A or Elliptical. Scroll through the screen until CHANGE MACHINE is
displayed. Press (ENTER), then press [Level: UP] or [Level: DOWN] to scan
through the choices. Select the machine type you want by pressing [ENTER].
Reset Data Set Up
Scroll through the screen until RESET DATA SET UP is displayed and press
(ENTER). All customized customer settings will be cleared.
NOTE: The Console will need to be recongured.
Clear Error Log
Scroll through the screen until CLEAR ERROR LOG is displayed and press
(ENTER). The word DONE will appear and all accumulated errors in the Erro
Log will be cleared.
Reset Console
Scroll through the screen until RESET CONSOLE is displayed and press
(ENTER). Resets all defaults to original manufacturing settings.
NOTE: The Console will need to be recongured.
Operation