Owner’s Manual
41
2. Clean the exterior of the machine daily using soap and water or a diluted, non-
mineral based household cleaner such as Fantastik
®
.
Inspection
1. Inspect the frame for any rust, bubbling, or paint chips during the daily cleaning.
The salt in perspiration can damage the unpainted surfaces. Repair the
damaged area with a touch-up paint kit purchased from StairMaster (call
®
Customer Service for order information).
Parts and Service
Regular and scheduled maintenance will prolong the life of your StairMaster
®
equipment. Only use genuine StairMaster replacement parts. The StairMaster
® ®
Customer Service Team invites you to call in your order for replacement parts.
External Power Supply
The StairMaster
®
Commercial Series St
epM
ill
®
SM916’s external power supply is
supplied with the unit and plugs into a standard 115 volt, 15 amp outlet, or a 220-240
volt 50 Hz, 10 amp outlet. (All major voltage plugs are available.) The plug-in for the
external power supply is located on the underside of the machine.
Daily Weekly Monthly
Every 3
months
Comments
General Maintenance
Check Safety & Warning
Labels
X
Spot Check Step Chains X
Alternator Belt Tension X Tension to 40-54 inlbs
Lubrication
Drive Chains
Or every
300 hrs.
30
W Oil
Bearing Plate X Multi-Purpose grease
Cleaning
Clean Console X
Clean with a water dampened
cloth and wipe dry after cleaning.
Clean Side Covers X
Clean exterior with soap and water
or a diluted household cleaner.
Maintenance Schedule
Maintenance
To Next Page
Loading...
