Stairmaster TreadClimber - Page 29

25. Install the front alternator shroud (Fig. 27) and secure
it in place by installing the corresponding two phillips
head screws at the circled locations.
Fig. 27
26. Wedge the neck grommet (Fig. 28) between the
alternator shroud and neck mast.
Fig. 28
27. With two or more people, have one person carefully
tilt the assembled TreadClimber
®
(Fig. 29) at an angle
by pushing up at the center of each handrail while the
second person installs the rear stabilizing feet.
Fig. 29
29