Stairmaster TreadClimber - Page 44

The following keys are available in MAINTENANCE MODE:
Incline Keys: Displays the next and previous parameter, respectively. Keys will repeat if held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in
increments of 1 unit or 0.01 unit, as appropriate for the parameter. These keys do not save the
new value - see Start Key and Key below.
Enter Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively,
the key may be used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Maintenance Settings Mode and restarts the TreadClimber greeting.
The items that you may display and change with the previous keys are:
Item Lowest
Value
Default
Value
Highest
Value
Meaning
MC1 V X.XX N/A N/A N/A Display’s primary processor software version and checksum.
LCB V X.XX
N/A
N/A
N/A
Display’s secondary processor software version and checksum.
SERIAL NO
0
0
65,535
TreadClimber serial number.
OPER HOURS
0
0
65,535
Total operating hours.
DISTANCE
0
0
65,535
Total treadclimber miles (UNITS=English), or km (UNITS=Metric).
UNITS
-
ENGLISH
-
English = units of pounds, miles, hours, minutes, seconds, feet, inches;
Metric = units of kilograms, kilometers, hours, minutes, seconds,
centimeters.
TIME
5
99
99
Maximum time in minutes allowed for program, including warm-up.
WEIGHT
1
155/70
500/226
Default (to user), typical weight in lb (UNITS=English), or kg
(UNITS=Metric).
LANGUAGE
-
English
-
Language in English, Dutch, French, German, Portuguese, Spanish,
Swedish, Italian or Katakana.
METS
-
OFF
-
ON=METS display enabled.
OFF=METS display disabled.
PAUSE
30
45
120
Pause duration during a program, in seconds, either 30, 45, 60, 90 or
120.
AUTO FAN
-
OFF
-
Turns on the fan 1 minute into program.
TREADLE
-
ON
-
ON=Elevation function enabled.
SENSE
OFF=Elevation function disabled.
AUTO STOP
-
OFF
-
ON=Auto stop feature enabled.
OFF=Auto stop feature disabled.
CSAFE
-
OFF
-
ON=CSAFE communication enabled.
OFF=CSAFE communication disabled.
PVS
-
ATSC
-
PVS type, ATSC/NTSC OR PAL/SECAM.
LOCK OUT
-
OFF
-
ON=TreadClimber lock out enabled.
OFF=TreadClimber lock out disabled.
44