Star Micronics TSP143IIU - 6-3. Self-Printing; 7-3. Releasing a Locked Cutter

– 21 –
6-3. Self-Printing
Test Printing
1) Make sure that the computer is turned on.
2) Make sure that the printer’s power cord is plugged into an AC outlet.
3) While holding the FEED button down, connect the USB cable to the computer.
Test printing starts. e version number and printer settings are printed.
Aer the printer starts printing, release your hand from the FEED button.
Aer self-printing is completed, the printer will start in the normal mode.