Star Micronics TSP143IIU - Connecting the USB Cable to the Printer

– 6 –
3-2. Connecting the USB Cable to the Printer
Pass the cable through the cable support as shown. en, connect the USB interface cable to
the printer.
Precautions regarding USB connections
1) Depending on the settings and congurations, the printer may not operate correctly with some
computers even if they meet the conditions for the connection environment. In addition, operation
is not guaranteed for connections through a USB hub or USB extension board, or for home-built
or modied computers.
2) Connect the USB cable directly to the computer’s USB port. If the printer is connected through a
USB hub or other device, the printer may not operate correctly.
3) is printer requires an electrical current of 100 mA/USB port or more for a given length of time
during operations, such as startup. If the electrical current is less than 100 mA, the following de-
vices may malfunction.
• is printer
• Devices connected to the computer’s other USB ports