Star Micronics TSP700 Series - Page 7

2.3 Paper Specifications (Thermal Paper)
(1) Paper Width: 79.5 ±0.5 mm/82.5 ±0.5 mm/57.5 ±0.5 mm
<Note> Do not change paper types while in use.
(2) External Dimensions
Take-up Reel Diameter: Maximum Roll Diameter: Ø 100 mm
Width (Roll-up Dimensions): 80 +0.5, -1 mm / 83 +0.5, -1 mm / 58 +0.5, -1 mm
(3) Paper Thickness: 65 µm to 150 µm (When paper width is 57.5 ±0.5 mm: 65 µm to 85 µm)
(4) Recommended Thermal Paper and Setting Print Density
Print density settings must be changed according to the type and thickness of the paper.
Density settings can be changed using the print density setting command <ESC> <RS> ‘d' n.
Manufacturer Product Name Quality Characteristics and
Use
Paper
Thickness
Value
(µm) N
P220AG Normal Type 65 3 (Default)
HP220A Long-storage Type 65 1
HP220AB-1 Long-storage Type 75 1
P220AB Normal Type (For Cards
and Tickets)
85 0
P220AC-1 Normal Type (For Cards
and Tickets)
95 3 (Default)
P220AC Normal Type (For Cards
and Tickets)
105 3 (Default)
P220AD Normal Type (For Cards
and Tickets)
130 3 (Default)
P220AE-1 Normal Type (For Cards
and Tickets)
150 3 (Default)
Mitsubishi
Paper
PB670/PB770 2 Color Type (Red/Black,
Blue/Black)
75 3 (Default)
PD150R Normal Type 75 3 (Default)
PD160R Long-storage Type 65/75 1
Oji Paper
Company
PD750R/PD700R 2 Color Type (Red/Black,
Blue/Black)
75 3 (Default)
Nippon
Paper
Industries
TF50KS-E2C Normal Type 65 3 (Default)
KSP P320RB/P320BB 2 Color Type (Red/Black,
Blue/Black)
65 3 (Default)
Ricoh LHB130 Long-storage Type ― *3 (Default)
<Note> * Use black printing in the two-color print mode command to print to LHB130.
(5) Shaft Core Inner Diameter (mm)/Outer Diameter (mm)
65 µm ≤ Paper Thickness ≤ 75 µm: Inner Diameter: Ø 12 ±1/Outer Diameter: Ø 18 ±1
Inner Diameter: Ø 25.4 (1 Inch)/Outer Diameter: Ø 32 ±1
75 µm < Inner Diameter ≤
150 µm: Inner Diameter: Ø 25.4 (1 Inch)/Outer Diameter: Ø 32 ±1
2-3