– 125 –
APPENDIX
Appendix E: USB, Ethernet and Wireless LAN Interface
E-1. USB Interface Specifications
1. General Specification: Conforms to USB 2.0 Specifications
2. Communication Speed: USB Full Speed Mode (12 Mbps)
3. Communication Method: USB Bulk Transmission Mode
4. Power Specifications: USB Self-power Function
5. Connector: USB Up-Stream Port Connector (USB Type-B)
E-2. Ethernet Interface Specifications
1. General Specification: Conforms to IEEE802.3
2. Communication Media: 10 Base-T/100 Base-TX
3. Communication Speed: 10/100 Mbps
4. Protocol: TCP/IP
5. TCP/IP detail: ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP,
HTTP, TELNET
6. Connector: RJ-45 (8-pin modular)
E-3. Wireless LAN Interface Specifications
1. General Specification: Conforms to IEEE802.1lb
2. Communication Media: 2.4 GH
Z
DSSS wireless CF card
3. Communication Speed: 1M/2M/5.5M/11Mbps AUTO Full-Back
4. Protocol: TCP/IP
5. TCP/IP detail: ARP, RARP, BOOTP, DHCP, LPR, #9100, IPP,
POP3, HTTP, TELNET, SMTP, SNMP, FTP
6. Operating Channels: North America : 1-11 ch
Japan : 1-14 ch
Europe : 1-13 ch
To Next Page
Loading...
