Star Micronics TSP800 Series - Appendix G: Memory Switch Settings

– 127 –
APPENDIX
Appendix G: Memory Switch Settings
Each memory switch is stored in EEPROM. For details on the functions and
settings of memory switches, see the separate Programmer’s Manual.
The table below shows the factory settings for the memory switches.
Memory Switch Hexadecimal Code
0 0000
1 0000
2 0000
3 0000
4 0000
5 0000
6 0000
7 0000
8 0000
9 0000
Warning!
Changing the memory switch settings can cause the printer to fail to operate
correctly.