– 22 –
ENGLISH
Adjustment value according to the paper you are using
Note
1) The standard model is set to level 1
prior to being shipped from the fac-
tory.
The wall mount model is set to level
3.
The wall mount model can only be
used at level 3, and therefore must
not be modified.
2) The C dimension and the remained
paper length are the calculated val-
ues. There may be some variations
in actual mechanism.
When using the paper roll with a core whose inside diameter (A):ø12, outside diameter
(B):ø18
Level 1 Level 2 Level 3 Level 1 Level 2 Level 3
ø23 ø27 ø31 2.5 4.9 7.7
2.1 4.2 6.7
Paper thick-
ness (
µ
m)
65
75
Remained paper length
(Approx. m)
Detected diameter (C)
(Approx. mm)
When using the paper roll with a core whose inside diameter (A): ø25.4, outside
diameter (B):ø32
Level 1 Level 2 Level 3 Level 1 Level 2 Level 3
ø36 ø40 ø44 2.8 6.4 10.4
2.4 5.5 9.0
2.1 4.9 7.9
1.9 4.4 7.1
1.7 4.0 6.4
1.4 3.2 5.2
1.2 2.8 4.5
Paper thick-
ness (
µ
m)
65
75
85
95
105
130
150
Remained paper length
(Approx. m)
Detected diameter (C)
(Approx. mm)
C
C
B
A
Roll paper core
To Next Page
Loading...
