Star Micronics TSP800 Series - Wall Mount Model Components

– 2 –
ENGLISH
Roll paper
User’s manual
Cover open lever
Pull this lever in the
direction of the
arrow to open the
printer cover.
Control panel
Features LED indica-
tors to indicate printer
status and switches to
operate the printer.
Printer cover
Open this cover to load or
replace paper.
Power switch
Used to turn on/off
power to the printer.
Power connector
For connection of the AC adapter.
Never unplug the AC adapter while
the printer is on.
Peripheral drive
connector
Connects to periph-
eral units such as
cash drawers, etc.
Do not connect this to
a telephone.
Interface connector
For connection to a
host computer.
Wall Mount/Stand Model
Bracket
(Option)
Stand
(Option)
Ferrite core Fastener
(A model with an
RS-232C interface
is not available.)
(Included with
Parallel and
Ethernet model)
(For USB interface)
(For parallel and
Ethernet interfaces)