Star Trac 4-TR - 15-Inch Embedded Incline Calibration

Page 32
Incline Calibration Procedure
1. On the top of the touchscreen, tap the upper left
corner, then upper right, then upper left again.
Password Screen will display.
2. Enter password 214 then tap . Service Menu will
display.
Fig. 39
3. Tap Calibration and Setup
Fig. 40
4. Tap Speed Calibration on the Calibration and Setup
screen.
Fig. 41
5. Press START to begin the calibration.
WARNING: Do not stand on moving surface
during calibration.
6. After the Incline Calibration is completed, press EXIT;
The Calibration And Setup screen appears.
7. Press to exit and go back to the Home Screen.
8. The Incline Calibration has been completed.
Fig. 42