Page 33
Item Description
Motor Calibration
This is the calibration program that is run to calibrate the drive motor for steady transi-
tions between speeds.
Elevation Calibration
This is the calibration program that is run to calibrate the minimum and maximum cali-
bration values.
Burn In Mode Manufacture test only.
CCB When a PVS CCB is properly connected, the version of software in the CCB will be display.
USB When a PVS CCB is properly connected, the version of software for the USB is displayed.
Manager Mode (E-TR & E-TRx Only)
From the idle screen (unit is powered on but not in a program), press and hold the , and keys
together. The word “MANAGER” will temporarily show in the marquee window and then go to the
rst setting. The Manager Mode has only limited settings to change where the Maintenance Mode
contains all available settings.
To Next Page
Loading...
