Need help?Do you have a question about the Star TSP100 futurePRNT and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Paper Width | 80 mm |
| Cutter | Auto Cutter |
| Maximum Print Width | 72 mm |
| Dimensions | 142 x 204 x 132 mm |
| Operating Temperature | 5°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Interface | USB |
| Media Width | 80 mm |
| Compatibility | Windows, Linux, macOS, Android, iOS |
| Weight | 1.7 kg |
Check that all necessary accessories are included in the package after unpacking the unit.
Identifies and describes the parts of the U Model printer, including the printer cover, power switch, control panel, and connectors.
Identifies and describes the parts of the PU Model printer, including connectors and covers.
Provides guidelines for selecting a suitable location for the printer, considering factors like surface, power, and environment.
Instructions on how to connect the USB or PoweredUSB cable to the printer for the U Model.
Details on connecting peripheral units like cash drawers using a modular plug to the printer.
Step-by-step guide on how to load thermal roll paper into the printer, including notes on paper types and cover closure.
Instructions for connecting the printer's USB or PoweredUSB cable to a USB port on the PC.
Procedure for connecting the power cord to the printer and a grounded AC outlet for the U Model.
Steps to turn on the printer, including locating the power switch and observing the POWER lamp.
Instructions for attaching the holder plate to mount the printer to a wall or position it vertically.
Instructions for attaching the four rubber feet to the bottom of the printer for vertical positioning.
Guide on installing the switch cover to prevent accidental operation of the power switch.
Details the specifications for thermal roll paper, including thickness, width, diameter, and core dimensions.
Lists recommended paper manufacturers and product names for the U Model printer.
Lists recommended paper manufacturers and product names for the PU Model printer.
Explains the components of the control panel, including the POWER lamp, ERROR lamp, and FEED button.
Details automatically recoverable and non-recoverable errors, their descriptions, and recovery conditions.
Instructions for performing test printing by turning the power ON while holding the FEED button.
Tips on how to prevent paper jams by avoiding touching the paper during ejection or cutting.
Step-by-step instructions for clearing a paper jam from the printer, including safety precautions.
Procedure to release a locked auto cutter by turning the printer off and on, or manual intervention.
Instructions on cleaning the thermal head using Isopropyl alcohol (IPA) and a soft cloth.
Guide on cleaning the paper holder and paper transport section with a soft cloth to remove paper dust.
Lists general specifications of the printer, including printing method, speed, density, width, dimensions, weight, and noise.
Details the specifications for the auto cutter, including cutting frequency and paper thickness.
Describes the interface specifications, including USB 2.0 and connector types for U and PU models.
Provides electrical characteristics for the U Model, including input voltage and current consumption.
Details electrical characteristics for the PU Model when using an AC adapter, including input, output, and current consumption.
Details electrical characteristics for the PU Model using a PoweredUSB cable, including output and current consumption.
Specifies the operating and transport/storage temperature and humidity ranges for the printer.
Outlines the mechanical life, head life, auto cutter life, and MCBF for the printer.
Details the settings for DIP switch 1, specifically for the power consumption mode (Standard or Low-power).
To Next Page