Star TSP100 futurePRNT - Thermal Roll Paper Specifications; Roll Paper Specifications; Recommended Paper for U Model

– 20 –
5. Thermal Roll Paper Specication
When consumable parts have run out, use those specied below.
5-1. Roll paper specication
Thermal paper
Thickness: 57~85 µm (excluding Mitsubishi HiTec F5041)
Note: When using thin paper with a thickness of less than 65 μm, only the F5041
(Mitsubishi HiTec Paper Flensburg GmbH),TF50KS-E2D (Nippon Paper
Industries) and P300/P310 (KSP) paper types are recommended.
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80 mm or (58 mm when the paper roller holder is used)
Core outer/inner diameter: Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
5-2. Recommended paper
Note:
1) The print density may vary depending on the type of roll paper, operating environment,
and power consumption mode.
2) A reader or scanner may not be able to scan a printed bar code or characters depending
on the print density. Make sure that your reader or scanner is able to scan correctly be-
forehand.
5-2-1. U Model
Manufacturer Product name Quality characteristics/Use
Paper thickness
(µm)
Mitsubishi Paper Mills
Limited
P220AG normal type paper 65
HP220A high image stability paper 65
HP220AB-1 high image stability paper 75
Mitsubishi HiTec Paper
Flensburg GmbH
F5041 normal type paper 60
Oji Paper Co., Ltd.
PD150R normal type paper 75
PD160R high image stability paper 75
PD170R high image stability paper 75
PD190R middle image stability paper 75
Nippon Paper Industries TF50KS-E2D normal type paper 59
Kanzaki Specialty Papers
Inc. (KSP)
P320RB 2 color paper: Red & Black 65
P320BB 2 color paper: Blue & Blac 65
P300 / P310 normal type paper 57 / 58
Note: The P300/P310 (KSP) paper types cannot be used when the printer is positioned vertically.
+ 0.5
-1
+ 0.5
-1