Starline S9 - Sensor Sensitivity and Range Settings

Setting tilt sensor sensitivity
Select 7 item of Settings menu and set sensor sensitivity from 0 to 30 level with and
buttons:
0 – tilt sensor is disabled, 30 – max sensitivity
Setting shock sensor warning level sensitivity
Select 8 item of Settings menu and set sensor sensitivity from 0 to 30 level with and
buttons:
0 – warning level shock sensor is disabled, 30 – max sensitivity
The warning shock sensor sensitivity must be set over the main shock sensor level.
Setting shock sensor main alarm level sensitivity
Select 9 item of Settings menu and set sensor sensitivity from 0 to 30 level with and
buttons:
0 – main alarm shock sensor is disabled, 30 – max sensitivity
The main alarm shock sensor sensitivity must be set below the warning shock sensor
level.
Setting tag (transponder) loss range
Select 10 item of Settings menu and set tag loss range value from 3 to 10 level with
and buttons:
0 – min distance, 10 – max distance
Setting tag (transponder) detection range
Select 11 item of Settings menu and set tag detection range value from 1 to 8 level with
and buttons:
1 – min distance, 8 – max distance
! Tag detection range must be set less than a tag loss range.
Settings remote key connection control
Select 12 item of Settings menu and set connection control period to 1 or 2 value with
and buttons:
20