1 – parameter function number
2 – parameter value
Operation menu points are flipped with and buttons up and down accordingly.
Parameters are tuned with and buttons short push up and down accordingly.
Long buttons pushing increases parameters tuning speed.
Listing menu points, changing settings and menu exit are confirmed with melody.
Time zone setup
Select 1 item of Settings menu and set matching time zone with and buttons.
! Current time is automatically retrieved from cellular network and satellites data (if GPS
module is available).
Setting lights and siren indication and Arming and Disarming
Select 2 item of Settings menu and set the mode with and buttons:
0 – hidden mode without siren and lights indication
1 – silent mode with lights indication only
2 – full mode with siren and lights indication
3 – only siren indication
Setting siren volume at Arming and Disarming
Select 3 item of Settings menu and set siren volume level with and buttons:
0 – silent mode, 10 – max volume
Setting lights and siren indication in Alarm mode
Select 4 item of Settings menu and set the mode with and buttons:
0 – hidden mode without lights and siren indication
1 – silent mode with lights indication only
2 – full mode with lights and siren indication
Setting siren volume setup in Alarm mode
Select 5 item of Settings menu and set siren volume level with and buttons:
0 – silent mode, 10 – max volume
Setting motion sensor sensitivity
Select 6 item of Settings menu and set sensor sensitivity from 0 to 30 level with and
buttons:
0 – motion sensor is disabled, 30 – max sensitivity
19
To Next Page
Loading...
